Micrel, Inc.
KSZ8851-16MLLJ
March 2010
59
M9999-030210-1.0
Receive Frame Header Status Register (0x7C – 0x7D): RXFHSR (Continued)
2
-
RO
RXFTL Receive Frame Too Long
When this bit is set, it indicates that the frame length exceeds the maximum size of 2000
bytes. Frames that are too long are passed to the host only if the pass bad frame bit is set.
Note: Frame too long is only a frame length indication and does not cause any frame
truncation.
1
-
RO
RXRF Receive Runt Frame
When this bit is set, it indicates that a frame was damaged by a collision or had a
premature termination before the collision window passed.
Runt frames are passed to the host only if the pass bad frame bit is set.
0
-
RO
RXCE Receive CRC Error
When this bit is set, it indicates that a CRC error has occurred on the current received
frame.
CRC error frames are passed to the host only if the pass bad frame bit is set.
Receive Frame Header Byte Count Register (0x7E – 0x7F): RXFHBCR
This register indicates the received frame header byte count information, the received frames are reported in RXFCTR
register. This register contains the total number of bytes information for the frame received and the CPU can read so
many times same as the frame count value in the RXFCTR.
Bit
Default Value
R/W
Description
15-12
-
RO
Reserved.
11-0
-
RO
RXBC Receive Byte Count
This field indicates the present received frame byte size.
Note: Always read low byte first for 8-bit mode opearation.
TXQ Command Register (0x80 – 0x81): TXQCR
This register is programmed by the Host CPU to issue a transmit command to the TXQ. The present transmit frame in
the TXQ memory is queued for transmit.
Bit
Default Value
R/W
Description
15-3
-
RW
Reserved
2
0x0
RW
AETFE Auto-Enqueue TXQ Frame Enable
When this bit is written as 1, the KSZ8851-16MLLJ will enable current all TX frames
prepared in the TX buffer are queued to transmit automatically.
The bit 0 METFE has to be set 0 when this bit is set to 1 in this register.
1
0x0
RW
TXQMAM TXQ Memory Available Monitor
When this bit is written as 1, the KSZ8851-16MLLJ will generate interrupt (bit 6 in ISR
register) to CPU when TXQ memory is available based upon the total amount of TXQ
space requested by CPU at TXNTFSR (0x9E) register.
Note: This bit is self-clearing after the frame is finished transmitting. The software should
wait for the bit to be cleared before set to 1 again.
0
0x0
RW
METFE Manual Enqueue TXQ Frame Enable
When this bit is written as 1, the KSZ8851-16MLLJ will enable current TX frame prepared
in the TX buffer is queued for transmit, this is only transmit one frame at a time.
Note: This bit is self-clearing after the frame is finished transmitting. The software should
wait for the bit to be cleared before setting up another new TX frame.
相关PDF资料
PIC18F24K20-I/SS IC PIC MCU FLASH 8KX16 28SSOP
PIC16F77-E/ML IC MCU FLASH 8KX14 A/D 44QFN
PIC16LF74T-I/ML IC MCU FLASH 4KX14 A/D 44QFN
PIC16F723-I/MV IC MCU 8BIT 7KB FLASH 28UQFN
PIC18F442T-I/ML IC MCU FLASH 8KX16 EE A/D 44QFN
PIC18LF2439-I/SP IC MCU FLASH 6KX16 EE A/D 28DIP
PIC16F687-I/ML IC PIC MCU FLASH 2KX14 20QFN
PIC18LF2439-I/SO IC MCU FLASH 6KX16 EE A/D 28SOIC
相关代理商/技术参数
PIC16F77T-I/PT 功能描述:8位微控制器 -MCU 14KB 368 RAM 33 I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16F77T-I/PTG 功能描述:8位微控制器 -MCU 14KB 368 RAM 33 I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16F77TIPT 制造商:MICROCHIP 功能描述:New
PIC16F785-E/ML 功能描述:8位微控制器 -MCU 3.5 KB 128 RAM 18I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16F785-E/P 功能描述:8位微控制器 -MCU 14KB 368 RAM 33 I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16F785-E/SO 功能描述:8位微控制器 -MCU 3.5KB FL 128R 18 I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16F785-E/SS 功能描述:8位微控制器 -MCU 3.5KB FL 128R 18 I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16F785-I/ML 功能描述:8位微控制器 -MCU 3.5 KB 128 RAM 18I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT